A functioning hot water heater is an essential appliance in any home, providing hot water for various daily tasks, including bathing, cooking, and cleaning. When your hot water heater malfunctions or breaks down, it can disrupt your daily routine and cause inconvenience. In such situations, it’s crucial to choose the right professional for hot water heater repairs to ensure a prompt and effective solution.

Find out about the steps to help you select the right professional for the job of water heater repair in Calgary.

1. Identify the Problem

Before you start searching for a professional to repair your hot water heater, it’s essential to identify the problem as accurately as possible. Understanding the issue can help you communicate effectively with potential repair experts and ensure that you receive the appropriate service.
Common hot water heater problems include:

No hot water or insufficient hot water
Leaking tank or pipes
Strange noises coming from the heater
Foul-smelling or discoloured water
Pilot light or ignition problems

By pinpointing the problem, you can provide clear information to potential repair professionals, making it easier for them to assess the situation and provide an accurate estimate.

2. Verify Credentials and Licensing

When searching for a hot water heater repair professional, it’s essential to verify their credentials and licensing. Reputable repair experts should have the necessary certifications and licenses to work on hot water heaters in your area. Licensing requirements can vary by location, so be sure to research the regulations in your specific area.

3. Seek Recommendations

Seek recommendations from friends, family, neighbours, or colleagues who have recently had their hot water heaters repaired. Personal referrals can provide valuable insights into the quality of service, professionalism, and pricing of the repair professionals they work with. Additionally, online reviews and ratings can help you gauge the reputation of potential repair experts.

4. Obtain Multiple Quotes

To ensure you receive a fair and competitive price for hot water heater repairs, it’s advisable to obtain multiple quotes from different professionals. When requesting quotes, be sure to provide detailed information about the problem you’re experiencing, as this will help repair experts provide accurate estimates.

While cost is a crucial factor, it’s equally important to consider other factors such as the reputation of the repair professional, their experience, and the quality of their work. Balancing these factors will help you make an informed decision.

5. Check for Insurance and Liability Coverage

Accidents can happen during hot water heater repairs, and it’s essential to ensure that the repair professional has adequate insurance and liability coverage. This coverage protects both you and the repair expert in case of accidents or damage that may occur during the repair process.

6. Inquire About Warranty and Guarantees

Ask potential repair professionals about any warranties or guarantees they offer on their work. Reputable repair experts should stand behind their work and provide warranties that cover both parts and labour. Understanding the terms and duration of these warranties can give you peace of mind regarding the quality of the repair.

7. Evaluate Experience and Expertise

Experience is a crucial factor when choosing a hot water heater repair professional. An experienced expert is more likely to have encountered a variety of hot water heater issues and can quickly and effectively diagnose and repair your unit. Additionally, inquire about the repair professional’s expertise with your specific type and brand of hot water heater.

8. Assess Communication and Professionalism

Effective communication and professionalism are essential qualities in a repair professional. Pay attention to how promptly they respond to your inquiries, whether they provide clear explanations of the repair process, and whether they arrive on time for appointments. A professional who communicates well and respects your time is more likely to provide a positive service experience.

9. Request References

Don’t hesitate to request references from potential repair professionals. Contacting previous clients can give you valuable insights into the repair expert’s work quality, reliability, and customer service. Ask the references about their overall experience and whether they would recommend the repair professional to others.

10. Inquire About Timelines

Ask potential repair professionals about their estimated timelines for completing the water heater repair in Calgary. While some repairs may be relatively quick, others may require more time and planning. Understanding the expected timeframe can help you make necessary arrangements, especially if you need hot water restored promptly.

11. Consider Energy Efficiency

If your hot water heater is older and experiencing frequent issues, you might want to consider whether it’s more cost-effective to repair it or replace it with a more energy-efficient unit. A knowledgeable repair professional can provide guidance on the best course of action based on your specific circumstances.

Calgary Plumber and Drains is your number one team of Calgary plumbers! Our success has been built on values such as honesty, hard work, affordable prices and superior customer service. We pride ourselves on offering clients throughout Downtown and surrounding areas with top-quality plumbing services, including leak repairs, installations, sewer and drain cleaning, toilet repairs, and water heater repairs in Calgary. As an emergency plumber in Calgary, we’re available when you’re in dire straits! For the number one plumbing company in Calgary, contact Calgary Plumber and Drains at 403-629-2920.

Calgary Plumbers and How to Prepare Your Sump Pump for Flood Season

Flood season can bring significant water damage to basements and lower levels of homes. To protect your property from potential flooding, it’s essential to ensure that your sump pump is in good working condition and ready to handle excess water. To secure the general structural integrity of your home and keep your home secure, homeowners opt to receive assistance from Calgary plumbers to stay prepared ahead of flood season.

Discover some essential steps to help you prepare your sump pump for the flood season and keep your home protected.

Inspect and Clean the Sump Pit

Start by inspecting the sump pit, which is the hole in the ground where the sump pump sits. Make sure the pit is free from debris, dirt, and any obstructions that could hinder the pump’s performance. Remove any accumulated debris, such as leaves or small rocks, and give the pit a thorough cleaning using a brush or hose. A clean sump pit allows the pump to operate efficiently and prevents clogs that could cause malfunctions during flood season.

Test the Sump Pump

Testing your sump pump is an essential step to ensure it is functioning properly. Begin by pouring water into the sump pit until the pump is activated. Observe whether the pump starts automatically and effectively pumps out the water. Listen for any unusual noises or vibrations that could indicate a problem. If the pump fails to start or does not remove the water efficiently, it may require repairs or replacement. It’s advisable to consult a professional if you encounter any issues during the testing process.

Check the Power Source

A reliable power source is crucial for the proper functioning of your sump pump. Make sure that the pump is plugged into a GFCI (Ground Fault Circuit Interrupter) outlet to protect against electrical hazards. Test the outlet by pressing the “test” button to ensure it is working correctly. Consider having a backup power source, such as a battery backup or a generator, in case of power outages during flood season. A backup power system ensures that your sump pump continues to operate even when the main power supply is disrupted.

Inspect the Discharge Pipe

The discharge pipe is responsible for carrying water away from your home. Inspect the pipe to ensure it is securely attached to the pump and is directing water away from the foundation. Clear any debris or blockages from the pipe to prevent water backups. Additionally, check that the end of the pipe is clear and not obstructed by dirt or vegetation. Proper discharge pipe maintenance helps prevent water from flowing back into the sump pit or seeping into your home.

Consider a Maintenance Service

If you are unsure about the condition of your sump pump or want to ensure it is in optimal working condition, consider hiring a professional for a maintenance service. A professional technician can inspect, clean, and test your sump pump, as well as make any necessary repairs or adjustments. Regular maintenance can identify potential issues before they become major problems and provide peace of mind during flood season.

Keep the Area Around the Sump Pump Clear

To allow your sump pump to function effectively, it’s essential to keep the area around it clear. Avoid storing items or placing obstacles near the pump that could interfere with its operation. Maintain a clean and clutter-free space to ensure easy access to the sump pump and prevent any potential damage or obstructions.

Conclusion

Preparing your sump pump for flood season is essential to protect your home from water damage. By inspecting and cleaning the sump pit, testing the pump, checking the power source, inspecting the discharge pipe, considering a maintenance service, and keeping the area around the pump clear, you can ensure that your sump pump is in optimal working condition. If you need assistance with any of these tasks, it is advised to contact local Calgary plumbers, who can sufficiently help you. Taking these proactive steps will help safeguard your home during flood season and provide you with peace of mind knowing that your sump pump is prepared to handle excess water effectively.

Calgary Plumber and Drains is your number-one team of Calgary plumbers! Our success has been built on values such as honesty, hard work, affordable prices and superior customer service. We pride ourselves on offering clients throughout Downtown and surrounding areas with top-quality plumbing services, including leak repairs, installations, sewer and drain cleaning, toilet repairs, and water heater repairs in Calgary. As an emergency plumber in Calgary, we’re available when you’re in dire straits! For the number one plumbing company in Calgary, contact Calgary Plumber and Drains at 403-629-2920.

Calgary plumbers and repairing your hot water tank

A water heater is one of the more imperative fixtures in any household that will enable you to have hot water when showering, dishwashing, washing clothes in a laundry machine, and so much more that keep a home functional. And while your hot water heater is your silent saviour that you may not think about a lot, without it, it can cause disarray. To ensure that your water heater is in good condition, you should be watchful of any signs of trouble that prompt a call to Calgary plumbers and related services for repair.

Discover the signs you should watch out for that could mean your hot water heater needs repairs or a replacement.

Lack of hot water production

A clear sign that your hot water tank needs repairs is when water production is minimal, if not completely gone. A rush of cold water will often be felt when you’re expecting hot water, which can be greatly unpleasant in any given situation. When hot water heaters begin to age, they will become considerably worse at producing hot water because of the build-up of sediment. Although minimal water production typically means that repairs are needed for your hot water heater, it could also mean you need a larger unit to meet the water consumption needs of your household.

Noises

While your hot water heater is expected to make some noises, you should not be hearing loud popping, cracking, banging, and low rumbling noises, and these should be cause for concern. When there is an excess of material build-up within the tank and on the different heating elements, it can produce louder noises than usual. If these noises are heard, you should contact Calgary plumbers and professionals to inspect your hot water heater sooner rather than later.

Hot water tank is leaking

Leaking is never a sign of good maintenance for any of your household appliances and fixtures, particularly when it concerns your hot water heater. When you have had a hot water heater that is consistently heating and cooling for years, it can eventually wear on the piece of machinery, and deterioration will occur. When your hot water heater begins to leak, you’ll likely notice a pool of water forming at the base of the heater. Oftentimes, if a leak is severe enough, it may mean that you’ll need to simply troubleshoot your hot water heater, or you’ll need to get it replaced.

Reduced water pressure

When mineral deposits and sediment has been built for long enough, they can cause damage to your hot water heater by minimizing the pressure of your household water. Reduced water pressure and minimized hot water production can culminate in an inconvenience you’ll want to remedy immediately by contacting professional plumbing services for repairs.

Rusty and cloudy water

Once the water from your taps appears cloudy or rusty, it usually means that the pipes in your home and the hot water tank have corroded on the inside and should be replaced soon. If the rust also emerges on the outside of the hot water heater, it is a greater indication that rust will be discovered on the inside, and a replacement should be contemplated.

Calgary plumbers and repairing your hot water tank

Discover the signs you should watch out for that could mean your hot water heater needs repairs or a replacement.

Lack of hot water production

Noises

Hot water tank is leaking

Reduced water pressure

Rusty and cloudy water

Running your Furnace in the Winter

Homeowners often rely on their furnaces operating in the winter to keep their homes comfortable during the coldest days of the year. After not using your furnace during the spring and summer months, the winter will begin to test the functions of your furnace as it will be utilized more often than not. When you begin to use your furnace in winter, it will prompt a question regarding how often a furnace should be on during the winter to avoid overworking the fixture, which might culminate in a need for furnace repair in Calgary.

Find out how often homeowners should run their furnaces during the winter to maintain them and prevent potential damages.

Furnace cycles

Furnace cycling often refers to how long a furnace will function to deliver heat within a home until it reaches a comfortable temperature. For example, if a household member sets the temperature to 70 degrees, the furnace will cycle heat for an allotted amount of time until the temperature reaches 70, and then the furnace will shut off. When the temperature begins to drop again after it shuts off, the furnace will start a new cycle to revert the temperature back to its desired level. Depending on your preferred temperature, the number of cycles that will occur daily will vary, as will the amount your furnace will be running–something you must factor in.

How often to keep the furnace on

There is no suggested timeframe to keep your furnace running, as it all depends on external factors, such as the size of your home. On average, a cycle will last 15 to 20 minutes, and a cycle can reoccur every three to eight times an hour. While the time you run your furnace has dependencies you may not be able to control, homeowners should keep a watchful eye on how much their furnace is running to reduce wasted energy, which can also contribute to high energy bills. To prevent high energy costs, consider keeping the temperature in your home at a minimal level, so your furnace will not continuously cycle.

Factors

Many factors will determine how often you will use your furnace during winter, including if your home has no insulation or if your windows and doors aren’t properly sealed, all of which can make your furnace have longer cycles. These issues can be corrected when you seal your doors and windows and install insulation in your walls, ensuring that your furnace doesn’t run longer than it should and will effectively reduce the energy you use. Another less controllable factor that will make a furnace cycle duration longer is if you live in a large residence, where it will take longer to heat up, or if you reside in a perpetually cold climate.

Signs of damage

The number of times your furnace will cycle and heat your home will ultimately depend on different factors and how well your furnace operates. Like any fixture in the home, the furnace is not immune to damage, and some signs indicate problems may be on the horizon. A primary sign that something is wrong with your furnace is if it begins to cycle every two to three minutes, also known as short cycling. Short cycling is often caused by simple errors that can be quickly rectified, like a clogged air vent and old air filters that need to be replaced. Other, more severe problems, such as an aging HVAC that is deteriorating, or a damaged thermostat, blower motor, and flame sensor, all of which will require a furnace repair in Calgary from an HVAC repair professional

During the summertime, people don’t think much about their plumbing in Calgary. The assumption is that nothing needs to be done about it until the weather gets chillier. However, the warmer weather doesn’t exempt a plumbing system from any possible problems. You can avoid potential summertime plumbing issues by checking out a few tips and tricks below!

Summer Plumbing in Calgary: Tips & Tricks

Test Sump Pump

In summer, Calgary weather can be prone to sudden heavy rain. As a result, it can lead to flooding. It can devastate your home by having flood water fill up your basement and create water damage. In turn, it can lead to the deterioration of your house and risk to your health by creating a breeding ground for mold. Sump pumps prevent water from entering your home by pumping water out and through a discharge pipe outside. Keep water at bay and test your sump pump to ensure it’s working properly!

Check Sprinkler System

Sprinkler systems are in full swing for usage during the summer. Yet, some issues can occur if you don’t check its condition. Commonly, sprinkler systems end up getting leaks. Furthermore, sprinkler heads that aren’t working create clogs. In this case, you want to replace them to avoid such problems. An embedded sprinkler system on your lawn without clean heads can lead to flooding, backed-up water and lawn areas drying out.

Mindful of Root Growth

Once spring has passed, summertime is the time for most greenery to flourish and grow truly. Unfortunately, when roots spread out further for more nutrients, it can interfere with your sewer line. In turn, it can cause a sewer backup in your home. If you suspect an issue with your sewer line, it’s best to have a plumber in Calgary to see the level of damage you could be facing. Better to be safe than sorry if the tree near your home is impacting your sewer line this summer.

Be Aware of Sweating Pipes

What exactly are sweaty pipes? They’re the condensation on pipes, faucet heads, and other plumbing fixtures when cold water runs or has just run through them. Typically, these are temporary and are quite common. However, it becomes an issue if you see it constantly. Usually, the culprit is a leaky faucet, running toilet or improper main valve adjustment. So keep an eye out for sweaty pipes to avoid those plumbing problems!

Know the Main Water Valve

Are you aware of what your main water valve does? If not, it would be imperative for you to know! Your main water valve can cut off your water supply. In cases of leaks or bursts, you would want to know where to shut it off to prevent water from continuously spewing everywhere and causing potential damage. Typically, you can find them in a basement, garage or utility closet. Others have one outside or near the water main in the street, curb or sidewalk. If unsure, you can always consult a plumber to ask where it is.

Find the Right Pressure

During the summer, you get more usage out of your shower, washer and other water-based appliances and fixtures. That’s why you need to ensure your water pressure is right. According to the City of Calgary, “homes built after 1990 in areas of over 80 PSI are equipped with a pressure reducing valve (PRV).” If your home is older or the PRV is over five years old, the water pressure in your home will become too high, and you will need maintenance.

Calgary Plumber and Drains is your number one team of Calgary plumbers! Our success has been built on values such as honesty, hard work, affordable prices and superior customer service. We pride ourselves on offering clients throughout Downtown and surrounding areas with top-quality plumbing services, including leak repairs, installations, sewer and drain cleaning, toilet repairs, and water heater repairs in Calgary. As an emergency plumber in Calgary, we’re available when you’re in dire straits! For the number one plumbing company in Calgary, contact Calgary Plumber and Drains at 403-629-2920.

Nothing can make you sweat more than dealing with plumbing problems during the summer. As many Calgary plumbers know, the summer months in the city can result in heat waves that have many Calgarians increasing their water usage. However, in doing so, this stress on your plumbing can create a host of unexpected problems.

Learn what the top four common plumbing problems you encounter during the summer are. This way, you don’t need to sweat about any plumbing issues arising!

Problem #1: Various Types of Clogs

Summer is the time of the year when people are at home more often due to school being over and more work holidays. In which case, you can expect more usage out of your plumbing besides yourself and possibly your household. Friends and family come over more often during this time, which can cause unexpected plumbing problems.

For instance, you can expect clogs during summer to occur most likely from:

Your toilet
Your garbage disposal
Your shower
Your sink

Unfortunately, not every person is mindful of your plumbing system, so the increased usage can result in clogs in those areas of your home.

A woman is showing a leaking washing machine to a plumber.

Problem #2: Laundry Water Supply Line Leaks

Calgary is no stranger to heat waves. People end up dripping in sweat that soaks easily through clothes. On top of that, many generally get their clothes dirty more often because of various activities (e.x. hiking). As a result, many use their washing machines frequently to clean said clothes.

Continuous use of your washing machine over a period of time can wear down your water supply lines and shut off valves. It can also create leaks over time in your washing machine’s water supply line hoses, which can potentially lead to flooding. Avoid having to pay for potential water damage by changing your water supply hoses every couple of years. We recommend always using a braided water supply line.

Problem #3: Risk of Sudden Flooding

Beyond the heat, summer also comes with rain. In Calgary, rainfall can come suddenly and heavily. Depending on the severity, it can potentially cause your basement to flood. When you’re susceptible to flooding, the watery debris can bring in bacteria and germs into your home that can be a breeding ground for sickness. Furthermore, flooding creates significant water damage that would need repairing – which can get costly. You can prevent spending a fortune on repairs by ensuring your sump pump is in good condition. Once you know your sump pump is in working order, it can effectively help steer heavy rainfall water away from your home and prevent any flooding from occurring.

Problem #4: Possible Kitchen Leaks

Like with your washing machine, you can expect frequent use of your dishwasher during the summer. Social gatherings like having BBQs with friends and family mean a lot of dishes that need cleaning. The most convenient way to clean up is generally with a dishwasher, but having so much demand can lead to system leaks. A tell-tale sign there is something wrong is if you see water pooling around your dishwasher or your dishwasher will not drain . In which case, you want to reach out to plumbing in Calgary that can directly assess and fix the issue.

Nothing is more worrying than turning on your hot water and hearing their pipes vibrate. All Calgary plumbers can affirm that choosing to ignore the sound of vibrating hot water pipes should be addressed.

By getting to the root of the issue, you can effectively figure out what is required to fix them.

After all, it’s better to be safe than sorry!

What Causes the Vibrating & Noise?

There are a few reasons your pipes will vibrate and make a noise when they’re turned on. Firstly, it can come from loose pipes, where the supports that keep them up are loosened. Another is hydraulic shock (water hammer). It happens when there is an immediate increase in water pressure, triggered by the speed or direction of water in pipes suddenly changing. Alternatively, it can simply be from temperature fluctuations. Lastly, it could potentially be the air in your pipes which is the problem.

Understanding the Issue & Fixing It

Once you have identified the reason for the sound, it’s good to know what each one can do to your plumbing. Having that knowledge is instrumental in understanding what certain measures are needed to fix it.

Hydraulic Shock

If you hear vibrating noise from your pipes, regardless of whether you have turned the hot water on or off, the likely culprit is hydraulic shock (water hammer). It poses a problem by causing your pipes to rupture or even collapse. The common solution is to install a pressure-reducing valve so that it can counteract those effects.

Loosened Pipes

When your pipes aren’t properly supported, the water that runs through them can hit whatever is near them. In this case, it’s important to understand which specific pipes aren’t well supported by seeing if they have any loose clamps. If the clamps are accessible, they need tightening to keep them secure. Yet, it might not always be easy. If pipes are behind the walls, call a plumber. They can effectively find the right pipe that needs repairing.

Temperature Changes

Have you ever been spooked by a sudden unexplained noise and assumed it was a ghost? If so, you probably heard someone say in response, “It’s just the pipes!” Unlike supernatural horror movies, the sound does come from pipes! The creepy sound is usually from a person running hot water that causes the pipes to expand and rub anything nearby. You can fix this by lowering the temperature on your water heater or having your pipes insulated.

Air in Pipes

You may be asking yourself: “How can air get into pipes?” Air enters the system when the water supply is cut for too long. You can fix this issue by running faucets or flushing toilets. However, if the air is trapped for too long, it can lead to corrosion and rust forming in pipes. If you can’t fix it through running water, it’s best to call in an expert to pinpoint the problem and repair it.

Most folks might not know a sump pump until their basement is ankle-deep in cold water suddenly. It’s a scenario that many Calgary plumbers know all too well since a damaged sump pump can quickly turn into a plumbing emergency. Knowing what a sump pump is and how it works can better understand any issues that might arise in the future and deal with them accordingly.

What is a Sump Pump?

In 1946, the sump pump was invented by U.S. Navy electrician Karl Niedermeyer to help prevent large amounts of water from collecting under a house’s foundation. It became a mandatory inclusion for homes after the late 80s since it helps prevent groundwater intrusion by removing water accumulated in the sump basin. Typically the collected water from the sump basin comes from storms or when the groundwater level is above your basement floor – hence why you can find a sump pump in the basement.

How Does a Sump Pump Function?

First, where can you find a sump pump in your basement? You can find a sump pump by knowing where the sump basin is located – usually in a corner or against an outside wall. Once you find it, you will see many holes in your sump basin wall, all of which connect to a drain pipe. Depending on your home, some drain pipes will come from weeping tile pipes outside the bottom of your home’s foundation, while others connect to interior drainage systems under your basement floor.

When groundwater collects and flows into a drain pipe into your sump basin, the sump pump kicks into gear when it reaches a certain level. Depending on your sump pump, it activates in one of two ways: a pressure sensor or a float activator arm. The pressure sensor sends a signal to your pump when water pressure exceeds a certain level. A float activator arm uses an attached buoyant ball that floats on the water’s surface, where the sump pump is activated when the water level reaches a certain height.

Once the sump pump gets into gear, an impeller inside your pump draws water out of the sump basin and sends it up a discharge pipe. You can expect the discharge pipe to empty far from your home’s foundation.

How to Maintain a Sump Pump?

Maintenance is important. If you have issues with your sump pump, it can become a bigger issue. A faulty sump pump can result in terrible water damage like flooding, warped wood, cause rot, and lead to mold growth that can be expensive to cover the costs on.

Some factors that indicate a damaged sump pump:

Strange noises
Visible rust
Vibrates too much when running
Infrequent pump usage
Running too much
Irregular cycling
Older than seven years
Motor stuck or motor failure

For maintenance, it’s recommended to get a sump pump regularly inspected every three to four months, with a more in-depth one to be done annually by a plumber.

Your water heater plays a vital role in providing you with hot, comfortable water. So when it breaks down, it’s important to make sure that you get it replaced as soon as possible.

However, most people are immediately concerned with the cost of replacing their water heater system. This is due to the fact that they might not be informed about the overall cost of the project.

Having a firm idea of what can impact the cost and the average price of the water heater replacement in Calgary can alleviate any concerns. And our guide can explain it all.

What Impacts the Cost of Water Heater Replacement?

The Type of Water Heater

There are numerous types of water heaters, including gas, electric and natural. Each of these options has its own pros and cons, so it ultimately depends on what you want for your home and lifestyle.

The Brand of the Water Heater

Each brand – from Rheem to Bradford White – has its own unique way of manufacturing its tanks, affecting the efficiency, lifespan, warranty and cost. It’s important to consider each of these factors when choosing a brand.

Tank vs Tankless

Water heaters are available in two options: tank and tankless. Both offer pros and cons and have to be installed differently, which can influence the cost of your replacement.

Are you interested to know how much a gas water heater installation costs? Read our guide here!

The Size of the Water Heater

Simple mathematics here: the larger the water heater, the more will cost you. So make sure you consider how large a water heater you want for your home.

The Labour of the Replacement

This is what will most likely have the biggest impact on your price. The quality, experience and workmanship of the Calgary plumbers replacing your heater will affect your total cost. It’s always better to go with industry-leading experts as opposed to the “cheaper” alternative.

Any Additional Work

The removal of your old unit and replacement of your new one will affect the hourly cost of the project, as well as retrofitting any existing connections and hauling away your old water heater and any materials from the replacement.

The Average Cost of Water Heater Replacement in Calgary

It can be difficult to determine the cost of a water heater replacement project without considering the above factors and speaking directly to a Calgary plumber. However, having a rough estimate of the cost can be a useful guide:

Home Advisor says that “installing a water heater costs between $815 and $1,591, or an average of $1,201, including the unit and labor.”
Home Guide offers similar rates, stating that a “Water heater installation costs $600 to $1,800 on average.”
This Old House also says that “A 50-gallon water heater costs around $1,000 for an electric heater and $1,200 for a natural gas heater of the same capacity.”
Finally, The Yellow Pages states that “The cost of replacing a water heater in Canada can range from $105 to $8,300, with the average cost being $1,466.”

Contact a Calgary Plumber and Drains today so you can get a clearer estimate of the overall cost of your project.